Show simple item record

dc.contributor.authorDroubi, Mohamad Ghazi
dc.contributor.authorTebowei, Roland
dc.contributor.authorIslam, Sheikh Zahidul
dc.contributor.authorHossain, Mamdud
dc.contributor.authorMitchell, E.
dc.date.accessioned2017-02-21T14:59:33Z
dc.date.available2017-02-21T14:59:33Z
dc.date.issued2016-07-11en
dc.identifier.citationDROUBI, M.G., TEBOWEI, R., ISLAM, S.Z., HOSSAIN, M. and MITCHELL, E. 2016. Computational fluid dynamic analysis of sand erosion in 90 degree sharp bend geometry. In Proceedings of the 9th international conference on computational fluid dynamics (ICCFD9) [online], 11-15 July 2016, Istanbul, Turkey. Available from: http://iccfd9.itu.edu.tr/assets/pdf/papers/ICCFD9-2016-128.pdf.en
dc.identifier.urihttp://hdl.handle.net/10059/2183
dc.description.abstractThe prediction of erosion damage due to sand presence during hydrocarbon production is a major threat to the integrity of the production facilities. Sand production from oil and gas reservoirs can cause a significant damage to different pipeline components, and as a consequence, may lead to unwanted maintenance costs and potential environmental damage. In this work, a computational fluid dynamics (CFD) model was developed to investigate how altering flow conditions, pipe geometry and solid particle variables might affect the sand erosion rates at pipe bends. The model was first validated against particle tracks and erosion profiles presented by a published research with reasonable agreement. Erosion rate was found to decrease as the pipe diameter was increased with significant reductions observed when the pipe diameter was increased by the smallest degree (i.e. from 4" to 6"). Increasing the bend radii of 1.5D, 3D and 5D also resulted in a gradual decrease in maximum erosion rate observed in each test case respectively. However, it was observed that the surface area damaged by erosion increased as the bend radius was increased. It was found also that increasing particle size results in significantly larger erosion rates with different erosion scarring associated with each particle size. Moreover, no direct correlation was observed between increasing the carrier fluid density and the erosion rate. . However, much larger magnitudes of erosion were observed when gas (low density) was the carrier fluid when compared to oil and water individually. Besides, as expected, erosion rate was found to increase significantly with increase in flow velocity. The final tests conducted were carried out when the distance between two bends in series was increased from 2.5D to 5D and then to 7.5D. Interestingly, erosion was found to increase as the distance between the bends was increased.en
dc.language.isoengen
dc.publisherICCFD9en
dc.rightshttps://creativecommons.org/licences/by-nc-nd/4.0en
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.subjectSand erosionen
dc.subjectComputational Fluid Dynamicsen
dc.subject90 degree benden
dc.titleComputational fluid dynamic analysis of sand erosion in 90 degree sharp bend geometry.en
dc.typeConference publicationsen
dc.publisher.urihttp://iccfd9.itu.edu.tr/proceedings.phpen
dcterms.dateAccepted2016-04-24en
dcterms.publicationdate2016-07-15en
refterms.accessExceptionNAen
refterms.dateDeposit2017-02-21en
refterms.dateFCA2017-02-21en
refterms.dateFCD2017-02-21en
refterms.dateFreeToDownload2017-02-21en
refterms.dateFreeToRead2017-02-21en
refterms.dateToSearch2017-02-21en
refterms.depositExceptionNAen
refterms.panelBen
refterms.technicalExceptionNAen
refterms.versionAMen
rioxxterms.publicationdate2016-07-11en
rioxxterms.typeConference Paper/Proceeding/Abstracten
rioxxterms.versionAMen


Files in this item

This item appears in the following Collection(s)

Show simple item record

https://creativecommons.org/licences/by-nc-nd/4.0
Except where otherwise noted, this item's license is described as https://creativecommons.org/licences/by-nc-nd/4.0