Show simple item record

dc.contributor.authorArdila-Rey, Jorge Alfredo
dc.contributor.authorMontaña, Johny
dc.contributor.authorAlbuquerque de Castro, Bruno
dc.contributor.authorSchurch, Roger
dc.contributor.authorUlson, José Alfredo Covolan
dc.contributor.authorMuhammad-Sukki, Firdaus
dc.contributor.authorBani, Nurul Aini
dc.date.accessioned2018-03-29T10:59:53Z
dc.date.available2018-03-29T10:59:53Z
dc.date.issued2018-03-29en
dc.identifier.citationARDILA-REY, J.A., MONTANA, J., ALBUQUERQUE DE CASTRO, B., SCHURCH, R., ULSON, J.A.C., MUHAMMAD-SUKKI, F. and BANI, N.A. 2018. A comparison of inductive sensors in the characterization of partial discharges and electrical noise using the chromatic technique. Sensors [online], 18(4), article ID 1021. Available from: https://doi.org/10.3390/s18041021en
dc.identifier.issn1424-8220en
dc.identifier.urihttp://hdl.handle.net/10059/2836
dc.description.abstractPartial discharges (PDs) are one of the most important classes of ageing processes that occur within electrical insulation. PD detection is a standardized technique to qualify the state of the insulation in electric assets such as machines and power cables. Generally, the classical phase-resolved partial discharge (PRPD) patterns are used to perform the identification of the type of PD source when they are related to a specific degradation process and when the electrical noise level is low compared to the magnitudes of the PD signals. However, in practical applications such as measurements carried out in the field or in industrial environments, several PD sources and large noise signals are usually present simultaneously. In this study, three different inductive sensors have been used to evaluate and compare their performance in the detection and separation of multiple PD sources by applying the chromatic technique to each of the measured signals.en
dc.description.sponsorshipFondecyt 11160115, Chilean Research Council (CONICYT) ; Capes Foundation, Ministry of Education of Brazil ; Ministry of Higher Education (MOHE), Malaysia and Universiti Teknologi Malaysia (UTM) (Research cost centre no. R.K130000.7740.4J315).en
dc.language.isoengen
dc.publisherMDPIen
dc.rightshttps://creativecommons.org/licenses/by/4.0en
dc.rightsAttribution 4.0 International*
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.subjectPartial discharges (PDs)en
dc.subjectInductive sensorsen
dc.subjectChromatic techniqueen
dc.subjectCondition monitoringen
dc.subjectElectrical insulation conditionen
dc.titleA comparison of inductive sensors in the characterization of partial discharges and electrical noise using the chromatic technique.en
dc.typeJournal articlesen
dc.publisher.urihttps://doi.org/10.3390/s18041021en
dcterms.dateAccepted2018-03-26en
dcterms.publicationdate2018-04-30en
refterms.accessExceptionNAen
refterms.dateDeposit2018-03-29en
refterms.dateFCA2018-03-29en
refterms.dateFCD2018-03-29en
refterms.dateFreeToDownload2018-03-29en
refterms.dateFreeToRead2018-03-29en
refterms.dateToSearch2018-03-29en
refterms.depositExceptionpublishedGoldOAen
refterms.panelBen
refterms.technicalExceptionNAen
refterms.versionVoRen
rioxxterms.publicationdate2018-03-29en
rioxxterms.typeJournal Article/Reviewen
rioxxterms.versionVoRen


Files in this item

This item appears in the following Collection(s)

Show simple item record

https://creativecommons.org/licenses/by/4.0
Except where otherwise noted, this item's license is described as https://creativecommons.org/licenses/by/4.0